mudduck Posted May 25, 2008 Share Posted May 25, 2008 Whats the best way to get the timing sprocket off the crank on a ea82 without messing it up? Thanks Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted May 25, 2008 Share Posted May 25, 2008 Whats the best way to get the timing sprocket off the crank on a ea82 without messing it up? Thanks You mean loosen the pulley bolt? Thread some rope into the #1 spark plug hole with the engine at BDC on the compression stroke (both valves closed). Then rotate the engine counter clockwise till it stops. Then remove the bolt. After you get the bolt off the pulley comes off then the sprockets slip off - they aren't pressed on or anything. GD Quote Link to comment Share on other sites More sharing options...
mudduck Posted May 26, 2008 Author Share Posted May 26, 2008 I already got the pulley off, and just after I made this post I got the sprokets off. For some reason I was thinking they might have been pressed on the crank and would need a puller. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.