Jump to content
Ultimate Subaru Message Board

EA82 .. oil pump. water pump, timing belts, gaskets


Guest baccaruda
 Share

Recommended Posts

Guest baccaruda

NAPA apparently doesn't stock the oil pump for an EA82? grr. other good sources please? I'm assuming that the dealer is more expensive and I'd prefer to go to them as a last resort, or only for..

 

the timing belts.. best to get these from the dealer, yes?

 

water pump.. I know there's 2 different styles. I bought the one NAPA had in stock and if it's wrong, i'll get the other one.. this one did not come with studs in the end for the pulley... the car has A/C, PS, all that good stuff. .. can we tell if it's the right one based on the lack of studs?

 

LAST THING i promise. yeah, right :P

got the intake manifold gaskets from the dealer. The guy at NAPA said they looked like they wouldn't use ANY sealant when I asked for a recommendation. What do you guys think?

 

thanks a bunch..

Link to comment
Share on other sites

Guest calebz

this is for the turbowagon?

 

Intake manifold gasket. It is recommended that you at least use sealant around the coolant port.. I personally use it all the way around. Blue RTV

Link to comment
Share on other sites

Guest grease weasel

I have a local mechanic who specializes in Subaru and Saabs.He get me all the part you mentioned.I use a Subaru Dealer as a last resort because they are so expensive.

Link to comment
Share on other sites

Guest thesubarukid

Hey Andy,

 

Did you try north Idaho import parts over here in Couer D' Alene? What about that subaru specialty shop in hayden off of highway 95? I'm sure that one of them would have the parts you need.

 

If you need more info like phone numbers, e-mail me.

 

Good luck,

Link to comment
Share on other sites

Guest Flowmastered87GL

I use a VERY thin coat of black RTV all around the intake gaskets just to be safe, but not enough to glop everywhere.

Link to comment
Share on other sites

Guest baccaruda

Hi guys. thanks for the replies.

I found a couple sources for an oil pump but I have a reseal kit and I'll have a couple used oil pumps to choose from .. one with 120k on it, one with i don't know yet. I am planning to just reseal it but keeping my options open.

Bought one of each WP from Napa and will return the unneeded one.

Getting the timing belts from the dealer tomorrow.

Called Subaru Stuff in hayden and he confirmed no sealant on the gaskets, just super clean mating surfaces. OK then!

thanks all.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...