Evanism Posted January 21, 2004 Share Posted January 21, 2004 Hey folks, I was trying to install factory curb lights into my 2004 Legacy. I assumed the wiring would be there, but it wasn't. When the door panel was off, a part fell off that I can't find a home for. It is a round wire ring, a little over an inch in diameter. Does anyone know where this goes? Also, can anyone tell me about the wiring for these lights? Thanks Quote Link to comment Share on other sites More sharing options...
Soup Posted January 21, 2004 Share Posted January 21, 2004 Does your legacy have manual window cranks? sounds like the retaining ring of a window crank arm Quote Link to comment Share on other sites More sharing options...
northguy Posted January 21, 2004 Share Posted January 21, 2004 Is it more like a horseshoe which curves to the outside at the ends? If so, it is as Soup says - the retainer clip for the windor crank. See if the handle pulls off. Quote Link to comment Share on other sites More sharing options...
Evanism Posted January 21, 2004 Author Share Posted January 21, 2004 I have power windows, so no crank. The ring is about 2 full turns of wire. Quote Link to comment Share on other sites More sharing options...
Supaglu Posted January 21, 2004 Share Posted January 21, 2004 Hi, It's not the spring that goes on the back of the door lock barrel is it ? DaveH Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.