HardcoreSoob Posted January 25, 2004 Share Posted January 25, 2004 hey do any of yall know what this thing is what it does, and what it affect....and what the hell it connects to b/c the other end looks like the wires been stripped and if so what wire is supposed to connect to it...the other end of the thing connects to the ignition coil +terminal...and it looks to me something should be goin to the other side of this thing.....thanx john sellers 85 brizat 1.8 2bb Hicrappy heres the link to the thing http://www.snapfish.com/thumbnailshare/AlbumID=10674685/t_=8611836 Quote Link to comment Share on other sites More sharing options...
GLCraig Posted January 25, 2004 Share Posted January 25, 2004 could you post the picture someplace that dose not require a loging. Quote Link to comment Share on other sites More sharing options...
Turbone Posted January 25, 2004 Share Posted January 25, 2004 Without a pic to go by, it "sounds" like the noise suppressor unit. Rob Quote Link to comment Share on other sites More sharing options...
HardcoreSoob Posted January 25, 2004 Author Share Posted January 25, 2004 ignition1 ignition2 login Seifer_66@hotmail.com gunblade <password Quote Link to comment Share on other sites More sharing options...
Qman Posted January 25, 2004 Share Posted January 25, 2004 OK, that is a condensor or resistor. It is used to primarily reduce static and radio noise I believe. You can get one off just about any Subaru in the junkyard. I reccommend taking the engine attachment bracket off instead of trying to unscrew it. Then remve the connection at the coil. Not an absolutely neccessary part but it is reccommended to use it. You may even be able to get it new from a dealer but it is probably pricey knowing the dealer pricing. Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted January 25, 2004 Share Posted January 25, 2004 Yeah - thats a condensor of some sort if I'm not mistaken. The one on my Brat was broken just like that - in fact - many of the ones I've seen are broken. The wire pulls out of the unit - it looks stripped when it does that. I didn't notice any adverse effects from not having one, but I replaced it when I located a good one at the JY. No difference with a good one. It just doesn't seem to have much effect either way. GD Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.