RAYJAY

the gates timing kit rocks its 4 or 5th one i used on different cars first Subaru one, compared to the FWD cars i have done the subies are a cake walk. thanks for all the help, jeff

part number is correct and thanks for the help jeff

on the 18mm non fouler any know where to get stainless steel one's ??? the brine they paste our roads here has taken a toll on mine .....and when they rust off they suck to remove ...don't even ask me how i know ....Jeff

sorry about that 2004 LGT its the rear lower bolts they look like 14 mm x 100mm long think its a 1.5 thread a 5/8 bolt may work ?/ cherryed the nuts and every thing they were welded had to cut one off

hi all i need 2 of the rear strut bolts the long bolts and nuts that fasten the strut to the lower knuckle does any know the size and thread of it even if any one has a part number would help?? Jeff

depending on cost might do 2 of them (xl please)

i knew by calling Jason i would be getting the right parts was going to do the crank seal while i was in there Jeff

http://www.subarupartsforyou.com/cp_partdetail.php?partid=14160 part number should be on that page, for valve cover gaskets i would just use the felpro set if its a complete set Jeff

called and ordered the parts from Jason @ Mike Scarff Subaru on the oil pump what do i have to check ???

IRC buy the seals from Subaru ?? or is after market ok . all ready have the t stat and gasket here OEM Subaru parts going to do new hoses and i have to order a couple of bottles of the antifreeze conditioner .... I also have to do the struts on this car which brand should i buy ????

Hi all going to do the timing belt very shortly on the wife 2004 LGT i know of the timing kits with all of the pullies and water pump, what else do i need to change when I'm in there ???? and how are the gates timing kits ? its the one I'm looking at on rock auto Jeff

on the 5th sensor i don't even know what code that one would give ????? would not be a bank 1 or bank 2 420 code that sensor covers both streams

did the mod on mine over 40,000 miles ( 2004 with the 5 sensors in it ) ago it does work you have to do both sensors after the cats ..... the only problem i have had is the anti-fouler will rot off after a while ...the driver side just rusted and broke tonight Jeff

I'm one that the Subaru stuff worked had the drip problem (small drip ) antifreeze smell could not find the leak used 2 bottle and good as al most new ........ jeff

GD do you freeze the bearing before you install them ??? jeff