Jump to content
Ultimate Subaru Message Board

NLAParts

Members
  • Posts

    26
  • Joined

  • Last visited

Everything posted by NLAParts

  1. Way back when we had one '76 and several 1978 sub 4WD wagons. I still have several shelves of good used subaru parts in one storage shed. They are FOR SALE, located in Victor, Idaho. Onesies-twosies at Market price, but much more reasonable if you take everything at once. So, what do you need? I have pictures of some parts. Charlie idpv@ida.net
  2. We had several of these rigs way back hen. I collected/ saved a lot of parts to keep them running, about a 1/2 shed full-- have sold some, still have lots left--a few engine parts ( one complete 1400 core), manifolds/carbs/dostributors/ side windows/side doors/ rear hatch/ suspension and drive line parts ( no trans) , instrument clusters, a few lights and lenses left, air cleaners, front and rear seatsetc. Too much to list. Some parts may also fit Brat. One part at reasonable market price, or sell the whole lot to a gen 1 enthusiast for a lump sum . Time for these parts to find a new home. Located in SE Idaho. Charlie idpv@ida.net
  3. Think spring! My enforced staycation has created a big shop clean-up opportunity. We had one '76 and 2 '78 Subie 4WD wagons back when, and a I have a half shed of salvaged useable parts for which I have no project car. I mostly saved mechanical parts, but also have doors, some glass, seats, 1400 engine core, a few remaining 1600 engine parts, clusters, driveline parts, etc. etc. Tell me what you need, i'll see if I have it. Individual parts at market price, I'd consider selling the whole lot reasonably, but you need to take it all. Located in southeast Idaho. Charlie idpv@ida.net
  4. Time to do spring cleaning, I no longer have any early Subies but I still have a lot of parts from several 78's that the kids finished off. About 1/2 shed full. I'll sell single parts at fair market value, or sell the whole bunch for $250, you will need a full size P/U. Core engine parts, differentials, side glass, doors, hatches, axles, some suspension parts, instrument clusters, starters & alternators, manifolds loaded with all sorts of devices, etc etc. Contact me with your needs and i'll take a look. Charlie in Idaho idpv@ida.net
  5. I have front carpet from a78 4WD wagon, maybe that would work? I know I still have the blue carpet, and I may have the black one too, Need cleaned. Best to email me directly at idpv@ida.net Charlie
  6. Way back when, we had several 1976-1980 early Subie 4WD wagons, two bit the dust and were parted out to fix the survivors. I still have a fairly significant collection of used parts in the shed, all for sale- individual items at market price; I'd also give someone who purchased and removed ALL the parts a good deal, to free up storage space. Mostly mechanical parts; manifolds, carbs, starters, alternators, some cables, shafts, suspension parts, radiators, heaters, plus doors and rear hatches, right front fender, good back seats, some side glass, etc. Engine cores, including a complete 1400 from 1976. Located in SE Idaho. Currently also on craigslist locally. Charlie idpv@ida.net
  7. 2017 update: I still have lots of parts left, available one at a time or as a bulk sale. REPLY TO ME DIRECTLY at idpv@ida.net, I do not have time to go to web sites much. See list posted last August, earlier in the thread. Happy Spring, Charlie
  8. Help clean up my shed! $250 for ALL the Subie parts if you pick them up and haul them. or By the each, I would hope for fair prices. Parts for 1978 Subaru 4WD Wagons: we had a couple of these rigs, I parted them out eventually. Now it’s time to clean the shed., struts, some drive axles, doors, rear hatches, side & rear glass, steering columns with the expensive stalk switches, some seats, dash/instrument cluster parts. Some left over engine parts, cores. Only core engines. I believe there parts will fit ’76 to ’79, wagon/brat/sedan all the same body style. One tough welded push bumper. What do you need? Parts located in Idaho. Sell for $ plus shipping to you. Charlie idpv@ida.net
  9. Parts for 1978 Subaru 4WD Wagons: we had a couple of these rigs, I parted them out eventually. Bodies gone, about 1/2 bully barn of parts. Now it’s time to clean the shed., struts, some drive axles, doors, rear hatches, glass, steering columns with the expensive stalk switches, some seats, dash/instrument cluster parts. Some left over engine parts, cores. Carbs, starters, alternators, Only core engines. I believe there parts will fit ’76 to ’79, wagon/brat/sedan all the same body style. One good front grille, good right from fender, ( no windshields). All for sale, if you make it worth my while! What do you need? idpv@ida.net
  10. Howdy, May 12th, 2013. I just put up a bunch of '78 4WD wagon parts on ebay, so take a look. Got lots more from 2 cars I parted out years ago.There will be more till they are all gone. Parts located in Idaho. What are you willing to buy? ( as opposed to asking for, then not sending the money....) NLAparts
  11. Howdy, May 12th, 2013. I just put up a bunch of '78 4WD wagon parts on ebay, so take a look. Got lots more from 2 cars I parted out years ago.There will be more till they are all gone. Parts located in Idaho. NLAparts
  12. Still reorganizing and cleaning the shop! found several Subie 1600 core engines, with manifolds, carbs, sensors, ERGs, etc. Couple of heads missing. Believe these are '78 to '80. Also one 1400cc core, from a '76. Pure unobtanium! Let me know what you need. email direct: Charlie: idpv@ida.net
  13. dn69141 I do have rear wiper arms. (2) Have 2 sets of wagon rear lights, not sure wich side is which, I'm selling the whole light fixture. e mail me for pics: idpv@ida.net
  14. to Petey: Got 2 sets of doors, with interior panels, door opening handle tirm, plus the little plastic pull handles Front Doors also have lock cylinders, and the matching rear hatches have lock cylinders. Got two ignition switches+ locking mechanism + ignition lock & key- one has been asked for and I've accepted an offer of $40 for it,but have not yet gotten the cash. I have only one key for each set of locks, so if you want to split up a set, I'll need to charge for an extra key ($6, locally) . It will take a good bit of work to salvage the lock cylinders from the doors, as they must be mostly disassembled! Be generous. Got two small bumper end caps loose, probably front, two larger one on the sole remaining square bumper-they are a little tweaked from sitting in the parts pile but will probably spring back in to shape. Got 1 rear mudflap, two fronts Got 2 pairs of side marker lights, different from each other- 2 red, 2 yellow. I have pics of the parts, e-mail me at my e-mail idpv@ida.net and I can send pics.
  15. Got 2 sets of used carpet, I think they were OK ( but used), I think one is blue, one black. not sure if it is worth shippping to Israel, you can probably get new carpets made up there! Charlie idpv@ida.net
  16. Just found a big box of subie light fixtures in the shed- Thought i'd offer it here first, before e-bay. 2 sets of upper rear taillights 2 good lower,+ one rough one couple of front corner lights, so-so 2 pair of side marker lights, 2 different styles Ask for a picture of what you want at idpv@ida.net and i'll try to figure out left from right, etc. Offers are good too! idpv@ida.net
  17. one right front fender from a '78 wagon. I have family in CO Springs and do visit occasionally! Charlie idpv@ida.net
  18. I believe the chrome lock bezels are pressed on to the lock cylinder and are not readily removeable--or reuseable-- at least they are that way on other door locks for other cars I've had. That said, I have 2 sets of front doors with locks. I have one set of keys, so I may even have a key. Otherwise, you would need to see a locksmith and have a key made. Many lock cylinders have a number on them, so then it's real easy. Retrieving thelock cylinders will require disassembling the doors somewhat. What's you offer? Charlie idpv@ida.net
  19. I have 2 left? rear and one right? rear tail light fixtures, plus one smaller one which may go below the tail light. I may have one front corner fixture Charlie idpv@ida.net. I think '77 to '79 were the same body style.
  20. I have several manifolds with carbs loose, plus a couple more on core engines. Dusty but ran. I'll need some help recognizing which ones are for a ,78! What sort of numbers on your carb? What's your offer? Charlie idpv@ida.net
  21. To all you who have answered this thread, I can't reply unless you give me your e-mail! I probably do have lock bezels on good doors; also two tailgate lifts, also several carbs! Email me at idpv@ida.net Look on ebay for 1978 Subie parts, I've sold some parts at fair prices, but I have some real low-ball offers, so i'll put those parts up on Ebay and see what happens!
  22. I think I still have one RF fender from a '78 in good condition. Located in SE Idaho. Charlie 208-787-2495, email idpv@ida.net
×
×
  • Create New...