lneulicht
Members-
Posts
41 -
Joined
-
Last visited
About lneulicht
- Birthday 10/02/1954
Profile Information
-
Location
Charlotte, NC
-
Vehicles
I Love My Subaru
lneulicht's Achievements
Advanced Member (3/11)
0
Reputation
-
It's a little late for this to be helpful now, but... I bought Mevotech mounts for the rear of my wife's 97 Postal Legacy. The left mount bushing tore loose on the first day and when she got home from the route the strut shaft was banging on the cover plate. The right mount bushing tore loose on the second day. Since I didn't have time to get replacements, I reinstalled the original mounts each night. (The ones that had 420,000 miles on them and were still okay). They are still working about 15,000 miles later. What a waste of time that was.
-
Odd that the AT temp light is not flashing on start up. Doesn't that indicate that there is no transmission code (or that the bulb is burned out)? I wonder if the OBDII code will provide any useful information.
- 47 replies
-
- Transmission
- first gear
-
(and 2 more)
Tagged with:
-
Perhaps the OP is asking if the crank gear makes two rotations to one cam gear rotation. This would be the case with any 4 cycle engine and it would be possible to have the timing off 180 degrees. I don't know what kind of engine damage would occur on his interference engine if he had the timing off like this. Edit: This post is incorrect
-
It's been years but I imagine the oil additive was something like Motor Medic Valve Medic. The gas treatment could have been anything that mentioned valves. I didn't use the Seafoam that time, but have used it since too decarbonize cylinders, after having seen it used on Youtube. Sorry I can't be more helpful. Maybe someone else will have better or more specific suggestions.
-
Sounds like the symptoms our 91 Postal Legacy had. Decided based on a radio show that the valves were sticking open when the engine heated from load, so it would gradually lose compression. Fixed it by using an oil additive that cleaned the valves and a decarbonizing gas additive, but it sounds like you've already tried that? Did you try adding something like Seafoam gradually into the intake manifold?
-
An unfortunate possibility is that the nylon speedometer gears are worn and slipping. These are considered by all but a few to be accessible only by pulling the transmission. Our Postal Legacys seem to eat them every 150,000 miles or so. The speedometers work intermittently for a while and then quit entirely. Hope this isn't what is going on for you.