[need help!]

Ok thanks

[need help!]

If i can't fix it she has to go to the "field"

[Ea 71 engines and tranys]

I could use one of those

[need help!]

Motor mounts and transmission mounts pooped out on me andi can't find a replacement for an '80 1.6 manual. If you have them and you are in washington i am willing to buy them.

[EA71 or '99 2.2rs turbo?]

I was just wondering if it be worth the time. I believe they only want $900 for it.

[turbo ea71?]

Are there any turbo/bigger motors that drop in?

[80 gl conv rwd?]

I put a new oem cv axle in. I followed every step. It happened again.

[turbo ea71?]

I have not

[turbo ea71?]

Is it possible to build a turbo motor(120hp) on a stock 4wd transmission?

[80 gl conv rwd?]

I fixed the чертовскй cv axle and it broke after half a mile. I think my car was destined to be rwd.

[80 gl conv rwd?]

That look overextended to me. Aftermarket tripod joint for sure....but I don't see anything "broken"

 

Does that car have an "over stock" lift??

I believe that it is stock but I am not sure.

[80 gl conv rwd?]

Don't just cut the axle. Remove the whole cage assembly from the cup. Just leave the cup and attached axle piece through the hub. I always keep a couple of these laying around, just in case. I do warn you again that you will be putting lots of extra strain on the diff. I exploded a welded diff with 26" tires.

 

Also these.

 

I can't open any of the links.

How does one go about taking out the cage assembly?

[80 gl conv rwd?]

Don't just cut the axle. Remove the whole cage assembly from the cup. Just leave the cup and attached axle piece through the hub. I always keep a couple of these laying around, just in case. I do warn you again that you will be putting lots of extra strain on the diff. I exploded a welded diff with 26" tires.

 

Also these.

 

[80 gl conv rwd?]

Nick are you in the pnw? If so you should come out and help with the "little" project.

[80 gl conv rwd?]

 

Why not just fix the axle? Pretty cheap and sure a lot easier to deal with.

the axle popped out and I've wanted to go rwd and I'm lazy

[80 gl conv rwd?]

I'm probably going to do this. So do i need stubs or can i just remove the front axles that attach to the knuckle?

[80 gl conv rwd?]

There is no reverse 4wd in the '80 gl.

[80 gl conv rwd?]

No reverse though.

[80 gl conv rwd?]

How do i get the cv out?

[80 gl conv rwd?]

So rwd?

[80 gl conv rwd?]

Hmmmm... rally? Or rally?

[80 gl conv rwd?]

Ok so i really dont want to replace the front axle and regrease it because as we all knoe thats messy. So should i fix it or do a rwd conversion?

[80 gl conv rwd?]

I broke the passenger side axle shaft. That is why i asked.

[80 gl conv rwd?]

I have an 80 gl 4wd and i was wondering if i could do an rwd conversion without swapping transmissions and everything?

[1980 gl 5 lug swap]

I have a 1980 gl and i've been wondering about doing a 5 lug conversion. I really just want to know if i can use parts off of a gl10