StarckMad

Thanks RD.

I have a '92 SVX with sunroof that slides open but not quite closed. Stays open about 1.5 inch. If i hold the button down I still hear motor turning. I cleaned tracks with WD 40, paper towels and cotton swabs doesn't move any further. Also lubricated linkage at back of sunroof. When it comes to a stop its a definite stop. Feeling the panel as it closes the stop seems to be on front driver corner. Any suggestions? Diagrams of this mechanism?

Thanks Montana. After "tightening" the belt I test started the engine and the belt squeaked.. Just tightened a bit more and squeaking stopped. Just needed the assurance I was doing the right thing. Thanks!

Just replaced the alternator on the SVX. I thought I Loosened the belt tensioner but still had to pry the belt off. What is the proper way to loosen the belt tensioner and of course re tighten it? Thanks! First post!