Ok, been hotwiring 99 legacy more than a year without any problems. I was using a light switch for the on/off and a springy button thing to engage the starter. It all worked well, and was simple for my gf to use as well. Then I found what i thought was a really cool new switch and button combo that would both fit well and look much better, so i took the light switch and button off and thats when things went south. I got sidetracked doing something with my neighbor, and during this time while all the ignituon wires were just hanging free, my gf decided she needed to drive to the store.
I heard her yell and saw the cloud of smoke come from under the hood. The big wire connecting the selenoid to the starter had fried - all the insulation was burned off and after it cooled down i taped that wire back up but it was clear the starter was done.
So i got a new starter, and now when i try to start the car it sounds like somethings not engaging. Theres no cranking sound, just a constant sound like things are just rotating. The cars been dead about a month now and i dont know what to do. I thought the starter may not be turning the flywheel but it is. I also cleaned all the ground wires i could find , had both the starter and alternator tested, and made sure theres spark. Its the weirdest sound trying to start it, everyone whos heard it says the same thing - that theyve never heard that before and that it sounds like somethings not engaging.
I dont know what to do please help
