Jump to content
Ultimate Subaru Message Board

Downwash77

Members
 View Profile  See their activity

  • Posts

    98

  • Joined

  • Last visited

 Content Type 

Everything posted by Downwash77

  1. Downwash77
    The opening for the driver side speaker is 3-1/4 so a 4x6 speaker wont fit.
  2. Downwash77
    Hello, does anyone know what speakes will fit under the dashboard of a second gen, the jbl speakers that do fit are NLA and Ive wasted much time and money already with speakers that dont fit. Thanks
  3. Downwash77
    Free brat cap (second gen) and seats. They have been in my way long enough. Cap has been robbed of shocks, handle parts and cab seal, driver seat frame is quite collapsed cloth is all intact passenger seat is good. Jason 860 840 1005 first come first serve
  4. Downwash77
    My 4mt duel range transmission is out and the socket that the the shifter arm goes into is very worn, is there any fix for this, I presume replacement parts are NLA. Thanks
  5. Downwash77
    Thanks, this is what I was thinking, we have the perfect landscape for exactly this type of driving.
  6. Downwash77
    Just finished my ea81 with new rings and bearing, wondering if there is any break in recomendations, thanks.
  7. Downwash77
    I use clover lapping compound it's a silicon carbide grease mix. Any grit is available.
  8. Downwash77
    Ea81 Longblock for sale. This engine is from 86 brat and has hydro lifters. The engine recived all new gaskets last year it has a new water pump. One of the valve guides is pretty worn although it runs well. $200 Jason 860 840 1005 thanks.
  9. Downwash77
    Thanks very much, that's what I was thinking!
  10. Downwash77
    Hello, does anyone know if a 02 SOHC engine will work in a 99 legacy that is equipped with a DOHC engine (both 2.5) I ask because there are two cars on Craigslist that need engines with good bodies and I have a good engine in my 02 I suspect wiring diffrences would be the only factor. Thanks
  11. Downwash77
    Hello, I have a brat cap for sale, has a broken latch needs gas Springs and cab seal, otherwise usable condition $80 obo 860 840 1005 text for pics, thanks.
  12. Downwash77
    If the block material is weldable it will need to be welded. Some pics would help
  13. Downwash77
    Fheww!!a
  14. Downwash77
    Could you maybe switch the whole tierod where it is attached to the end of the rack, assuming you haven't figured somthing out by now.
  15. Downwash77
    On this note I find it intresting to state, the aerokopter using a ej25 runs around 5600 rpms throughout its whole flight!
  16. Downwash77
    I paid around 2k for my 83 wagon and for thr condition it was in i thought it was a good price.
  17. Downwash77
    I adjust it so it grabs as soon as possible and it will still shift, I take those pedal play values with a grain of salt
  18. Downwash77
    I adjust it so it grabs as soon as possible and it will still shift, I take those pedal play values with a grain of salt
  19. Downwash77
    The wagon and hatchback are two different body styles so it stand to reason it is to narrow.
  20. Downwash77
    Whatever engine it is it needs a complete reseal, dosent get any esier than on ea81. And congrats on your new subie!
  21. Downwash77
    Thanks, and yes it's a 86, I'm working on a bracket for the headrests (I have the seats)
  22. Downwash77
    I ask this question because on my brat I have the headrests for the rear seats but there is no corresponding mounting holes for the headrests.
  23. Downwash77
    Thanks!
  24. Downwash77
    What online sources sell the CORRECT axle wheel seals, I don't have time to get them from napa. I'm reluctant to order them without knowing if they are correct, anyone vouch for a supplier that sells the correct seal? Thanks
  25. Downwash77
    Ngk plugs are recomended. I don't know if it's possible but can the coil be generating to much voltage.
×
×
  • Create New...