Search the Community
Showing results for tags 'Blinker'.
Found 3 results
-
I did some searching and couldn't find much. This problem really has me scratching my head. 1982 GL Brat 200K plus on the body When the Left turn signal is on, it blinks normally as it should, however the "Stop Lamp" light will blink on the dash in time with the signal light. When the Left turn signal is on, and the Brake is applied: The LR taillight alternates between turning on/off the Lamp and the Reverse light individually, and the time of the signal light on the dash is about half the speed. It completely forgets to flash the indicator light instead. Having both Brake applied and turn signal on, the "Stop Lamp" light on the dash shuts off. The right side is unaffected and has no problems with the signal under braking or not. I have checked fuses, checked bulbs, and even swapped out the entire LR taillight assembly from another Brat; same result with the slow alternation of Brake light and Reverse light. And just FYI the reverse lights work normally when in reverse. Anybody out there have a similar problem? I'm thinking I have a bad ground or a short somewhere... -
I'm looking for help diagnosing the front turn signal lights on my '89 GL Wagon. Problem: Both the right and left turn signal lights are not working on the front of the car. Assumptions: 1. The rear turn signal lights are working. 2. The turn signal light bulbs in the front are working (not flashing) when the headlights are on and not indicating to turn. 3. The turn signal indicator is working on the instrument panel when indicating to turn. 4. The normal clicking sound is heard when indicating to turn. 5. All of the fuses are good. Thank you for considering the above. Your advice will be appreciated. -
im sorry if this already exists elsewhere but i literally could not find anything about it including on the internet, if anything, it thinks im searching for a back up light switch, if one post already exists, please direct me to it. ive been wanting to do this project for quite some time now but i literally don't know where to start, i want my blinker to turn off and on instead of on and off, ive been running my car with the amber lights on for about 2 years now and using the corner parking light as my blinker, law seems fine with it so i want to step it up a notch, i want my amber lights to blink off and then come back on as i have it on with the virgin switch, and have my parking light on all the time once again like it should be. is there a kit where a small computer can do this online? the only thing i can think of is a double relay but that means that atleast one relay must be on all the time and ill end up with a dead battery anyways, if that idea even works. any help is greatly appreciated!!! thank you.
