Search the Community
Showing results for tags 'Legacy'.
-
Anyone how many years of legacy's will have the same style body parts like front end and fenders,grill ,lights i have a 90 will parte from 93 work for me? -
So the 401 is my rear differential makes a whining noise when brought up to speeds around 20 mph. it also likes to "clunk" at times. The whine I understand would logically come from bad diff fluid, or lack thereof. would pulling a differential off another legacy outback of the same year be a route to go if I don't want to risk draining and replacing fluid to find out its trashed? I would love to hear some opinions!! -
So I have a 1996 Legacy Outback, and it definitely needs to go lower. I have not seen a specific set of coilovers or springs made, probably because the rear load is different. any points in the right direction would be awesome!
-
i have a 95 legacy wagon and i can drive it anywhere , im always folling my friends in their lifted pickups etc. only thing is i would like more clearance, especially with the tow kit on the back that hangs down a bit lower. i believe my friend put outback suspension on his but was wondering what the tallest or best suspension to buy would be? im looking for something that i can just get from a "pull n save" for fairly cheap and would be fairly easy to find. any ideas??
-
I know there are many folks modifying their EA82-chassis Subarus for style or performance. Miata shocks with coilover sleeves, legacy and impreza coilover kits, etc. These all require some level of modification to install, an issue I've recently run into with my own project car. This lead me to develop a few parts to allow a bolt-in installation of a set of coilovers to the EA82 chassis. Without going into specifics my thought is a 12-piece kit to retrofit a set of coilovers for a legacy or late-model impreza coilover kit that would allow you to simply bolt the legacy/impreza parts to your 5-lug-swapped EA82, without cutting, drilling or welding anything, reusing all your original hardware. My question is, is this something that would interest you? I'm currently prototyping parts for myself, but if there is enough interest, I'll have some extras made at the same time. I've got a few photos up on my Instagram page: @templeoffuji -
I have a 2007 Outback with manual non-heated seats. I also have access to a 2007 Outback with electric seats that are heated. The interior in my Outback is trashed and I want to swap the good interior from the broken car into mine. Has anybody dealt with installing seats that have wiring for electric and/or heated situations? I'm assuming that the entire wiring harness to some degree needs to be changed. Anybody that's been through the process could help me save time I'd appreciate it. All the love from Colorado! -
Hey all, FNG here. My daughter inherited a 1995 Legacy L from my son and the struts are shot. It bounces so bad I won't let her drive it. My problem is I can't find a full set of loaded struts anywhere. Struts are no problem but I want springs, mounts, and all. Is there a reason no one seems to offer these or am I just to dumb to find them? I'm not interested in anything that will screw up the geometry and cause tire wear. Thanks! -
Just got a 92 Legacy runs great but the drivers power window doesn't work right. Or I should say the window switch works, window motor works, but the window itself does not slide when button is pressed. Its a crammed space in the door but i think im just missing a small metal part can't see so well. I've been looking for what assembly part im missing but can't find a reference number. Help? It would go straight from motor to drivers side window asssembly.
-
Has anyone ever found a manual steering rack that will fit a 1999 Legacy? Been looking around and just not sure if any old Subaru manual racks would fit. I've read rumors of people using Ford Pinto manual racks. -
So My 04 legacy jumped a gear pulling into a parking lot threw a p0866 engine code defined as a TCM Communication Circuit High. Also the flashing AT oil temp light. Is there a diagram I can see to find out if I’m able to access the issue or is it more internal and I’ll have to pull the trans for repair -
Theres a few questions below. Please feel free to answer any or all of them. Any help is appreciated. I tried to organize the post below I put a lot of the details i know about this car in the intro thread, but some basic info will be included. 95 legacy, 231k, lots of work has been done to maintain the engine and tranny, however i inherited a mess of safety issues. I will bullet my concerns below to keep organized and an easy read. Hopefully this post will keep my spacing inbetween topics. 1)Alternator: just discovered today, but someone had clamped the wires into the terminal connectors with the insulation, this inevitably melted and corroded the wires underneath and caused a short, i jerry rigged it for now, but the terminal bolt is also stripped and will not come off, nor can it be tightened... The alternator is fine otherwise, my question is am i able to replace just the terminal on an alternator? Or am i looking at changing the whole unit :(... Not that its hard, but you gotta hate wasting money because someone sucked at life when installing the current one. 2)Popping noise front passenger wheel area when hitting harder bumps?: I have replaced the rack and pinion, and inner and outer tie rods. The cv axles look fine and have no excessive play or anything. I am between the control arm bushing, which look fine, but not that you can see it, or the ball joint, which looked fine until i caught a specific angle and saw that one side of it is completely bare... The question here is, if it isnt the ball joint, will the control arm bushing become dangerous if failed, it looks like a solid piece with no chance of catastrophic failure unless it becomes unbolted... The driver side ball joint by comparison looks fine and its claimed just that one was repaired within the last yr or 2... With the otherone being at least 40k miles. Maybe older... 3)Steering: The reason why i changed the rack and pinion is because it was shot. Wasnt leaking but there was a lot of free play in the steering, there was alot of free play just pulling on the tie rods themselves, there was definite stiffness in the steering that increased the more it was used throughout a driving session(i.e. lots of turns in short amount of time would cause very notable rise in stiffness). And on hard turns from stop or going slow caused alot of vibration and feedback in the steering... So new one is in and fine, most of the symptoms are gone, but occasionaly i still get that vibrating feedback... Occasionally... And its no where near as severe... My question here is, am i just experiencing some aire in the system and need to rebleed the power steering? Or am i getting a warning sign that the pump is going out? Any other thoughts or suggestions on this question would be appreciated. Thanks for your time... I appreciate any thoughts or advice. -
I've got a 2002 Subaru Legacy Outback with a 5-speed manual transmission and I've been driving it for almost ten years. Just lately I've started having problems hitting the correct gears when I shift. I try to put it in 1st and I hit 3rd. I try to get into 2nd and I hit 4th. Sometimes I try to go into 3rd and I hit 5th. And there have even been several times when I've been shifting into 4th and I've hit reverse (which is really disturbing). It seems that all the proper gear positions are drifting to the left, so I'm now hitting one gear to the right of where I should be. The problem only started about a month ago, and it's definitely getting worse every day. Any idea what could be causing this? Is there some bolt that holds the transmission in place and could be coming loose? Or maybe the rods connected to the gear shift are starting to bend? Everything else is working and the car is driving fine, but changing gears is just going to be impossible if this keeps getting worse. -
I’ve bought a 1991 AWD Legacy LS Special wagon for a teen driver’s first car. It’s got a leak in the front air shocks. What is the most cost effective way to repair/ replace? I’m $1500 in and this car only has 98k miles on it, so a lot of potential life, but an inexperienced driver. Can they be swapped out for regular shocks or is there an affordable aftermarket air option? Should I look for struts from a junk yard? Is it worth it to pay $600 per strut to Subaru for their replacement parts? -
I am in desperate need of a 1994 Subaru Legacy EJ22 Wiring Harness and ECU in order to do a Volkswagen Vanagon Engine Swap. I have a custom made conversion kit through Kennedy Automotive out of Palmdale California that is made specifically for a 1985 Automatic Volkswagen Vanagon and a 1994 Subaru Legacy EJ22 engine. I have the transmission conversion kit and the engine and everything else that came with the cutom conversion kit except for the wiring harness. Any help in locating the part would be MUCH appreciated. I am willing to pay for shipping handling and labor if anyone can find one in decent condition. I can't find any junkyards within hundreds of miles of my location that have this car in their yards. I need this specific engine wiring harness because the conversion company has a deal with the state of California that allows instant smog certification on these specific engines. -
Basically.... About 3 weeks ago car was intermittent no start. Cranking was rough/rumbly and gas pedal hadda be teased in order for it to sometimes start. Attached a missing ground strap and car was reliable for a few weeks. Still had a bit of a rough/rumbly start but at least started and drove. It ran fine, but I pulled the motor for HG job and no spark after re-install. Tested coil pack resistance, tested bad. Swapped coil pack....didn't help. Power to coil pack, no signal to coil pack. Crank sensor & cam sensors pass resistance tests. Checked wiring to ECU, passed. Reinstalled ECU, engine started and ran for 15 seconds including idling and revs but no issue was actually solved... But we reinstalled accessories. Again, no spark, no signal to coil. Fuses tested/examined, so not a fuse. It's a 2001 Subary Legacy Outback 2.5/EJ25. Any advice on what might be going on or how to test the ECU would be great help. -
Please help! I just bought a 99 Subaru Legacy Outback with the 2.5l H4 motor and automatic trans. Car has 46k miles. I used Seafoam through a vacuum line to clean the engine because I was told the car had been sitting for a while. I put 1/3 of the can in at idle and then shut the car off to let the product soak in for 30 min. Upon starting the vehicle back up I noticed the AT oil temp flashing steadily. I performed a 10 mile drive to clear the seafoam out as directed... and the AT oil temp was still flashing. I let the car sit overnight and started it cold... Light is still flashing. Trans fluid is very clean, however, when making tight turns it feels like the car is grabbing hard. When the wheel is straight the car moves freely with very minimal gas given. Now my check engine light is on and I’m getting a P400 code for EGR. Any ideas? Thanks! -
Any help or info would be a help. Thanks Isaak---
-
We own a 2003 Subaru Forester XS 2.5L, VIN 6, 6th digit. Unfortunately, the engine heads and block cracked. We are searching for another 2.5L engine that would work. Main Question: What years/models come with a compatible engine for the 2003 Forester? For example, would a 2.5L from a 1999 Legacy work? Thank you in advance. -
Hello to all, I need some help with my Subaru Legacy Outback 2012. I live in Switzerland in an area where the winters can get rather cold but nothing under -15 Cel. My Outback at around 60K km after a winter where I opened and shut the windows several times has made all 4 windows loose in their rails. Some of the times I tried to open the windows they wouldn't budge so I should have just never touched them in winter if the car wasn't properly warmed up. I took off the front passengers side door panel and peeled back the plastic sheet and I believe it could be the bottom cable of the window regulator that is stretched. When I pull it the window has less play. Does anyone know if I take the motor and window regulator out is there a way to adjust the tension or tighten the cable in some way? Or should I just abandon this? Thanks in advance for your suggestions. I linked a video to this post to show you what I'm talking about. View My Video -
My 99 Legacy L 30th anniversary edition has 300K miles on it, shifter is beyond sloppy. I have not been able to find a shift rebuild kit for the Legacy, I'm wondering if the Impreza kits will fit or if anyone has experience with a Legacy kit. I'm looking for all linkages, arms and bushings. I know the bushings might come together but everything else may have to be ordered seprately. -
Sometimes I can be a scatter brain ... not thinking about it I just washed the undercarriage of my car almost immediately after getting a protective undercoat applied to my new Subaru . Did I just waste $600... ;(
-
Just thought i would share this awesome thing. A guy on ebay is selling an ea81/ea82 to ej22 swap with all the parts on ebay. Low mile engine. If I had the money and it wasn't 8 hours away, I'd be picking it up More than likely the seller is on this website too. https://www.ebay.com/itm/Complete-Subaru-EJ22-engine-with-EA81-EA82-conversion-setup-/202151761344 -
Howdy, All. I'm hoping to get some guidance/advice on where to go next. I've got a 99 Legacy Outback (30th Anniversary edition) that just flat out died while driving on the interstate. No previous problems or symptoms. Car turns over, just never starts. Note: The check engine light is not on. I've run the diagnostics, and gotten no codes. Here's what I've done: * I believe it's not getting spark (by spraying starting fluid and still nothing, also I can hear the fuel pump switch on and I pulled the fuel line and am getting output). * I put on a new coil pack - no change to the symptoms or status. * I took my ignitor and put it into another car. Other car performed fine. * I took out the crank sensor and the cam sensor to test them. They appear to be functioning fine. * I took out the ECU and put in one that I know to be fine - no change to the symptoms or status. *** Note: I found it weird that the car had the same symptoms regardless of whether an ECU was hooked up or not. Now, where do I go from here? Timing? Also, please know that about every fifty attempts at trying to start it, it sounds like it gets close to catching at the initial key-turn, but then nothing. Please help. -
Hi all I've owned my Legacy for a couple of months now and I think it's a great car. Surprisingly capable off road, and despite its tendency to pitch and roll, pretty good on the black stuff too, even at speed. My only two gripes are the lack of power (this issue is further compounded by the stainless exhaust exhaust that came with the car; she's pretty loud, which makes it feel slower still) My other problem is the brakes. When i first got the car they were very spongy and the brakes were dangerously weak. I took the car to the shop and had the brake fluid change. This improved the braking a fair amount, however I am still not satisfied with the feel and efficiency of the brakes. I have fitted a switch to enable/disable the ABS system, and with the ABS disabled, i am still unable to lock the wheels on dry tarmac, and I struggle even on wet tarmac to lock the wheels. Changing the fluid has helped, but i'm far from happy with the brake feel and performance. There's also plenty of meat left on the pads, and the discs appear to be in good condition. What would you guys recommend? Thank you in advance for your reply.
