Search the Community
Showing results for tags 'part'.
Found 4 results
2003 Impreza Outback Sport 5 speed I recently bought the car and it’s really fun to drive! Some noise coming from the rear end area above 30mph got me thinking I should look at the rear drive shaft universal joints and carrier bearing. With the drive shaft off there are definitely sticky spots in two of the joints. Napa, O’Reillys, and the local Subaru dealer all told me a very similar tragic tale: The U-joints are not replaceable and have no part number, but I can buy a whole new drive shaft for 500+ dollars. Not to be so easily discouraged, I removed one of the “non-removable” U-joints using a dremel and a steady hand, and took it to Napa and O’Reillys, neither of which could find a match in their stocked parts. Has anyone dealt with this before and happen to know of a U-joint that will fit in the 03 Impreza Outback Sport drive shaft? Thanks for any help!
Identify This Part?
TheLetterE posted a topic in Old Gen.: 80's GL/DL/XT/Loyales...Hey there everyone, I have started to some work on my new 1985 GL Hatchback. I am not super familiar with Subaru motors and I have intermediate/novice skills as a car mechanic ( I know vintage motorcycles much better ) Anyways, I was removing my AC and its components and saw this and was wondering what it went to? It is all metal, it goes down/behind/underneath the driver side valve cover. There is also a bracket behind it that looks like it may have supported something as well. My questions: – What is this? – What was attached to it? – Is this something I can operate the car safely without? – Does anyone have a reference photo for a GL with this component(s) not missing? Please see photo attached, I outlined the part in question in yellow. Thanks pals.
I just bought a used 1998 Legacy 2.2 5spd MT with ~169,000 miles on it. I'm looking for replacement knock and downstream O2 sensors for it. For the O2 Sensor, I am looking at the Bosch 15726. Is this a good sensor or should I go with the more expensive OEM part? For the knock sensor, I have not yet found a suitable part. Are there any non-OE parts or should I stick with OEM?
Hi all, I noticed a coolant leak and traced it (fortunately) to a coolant bypass hose. I managed to remove it, albeit with trouble as it's buried under spark plug and carb tubes/cables, an alternator (at least it gave me an opportunity to swap the old belt for that!), etc. No store around me carries such a small hose, molded of course. It is so tiny, a generic straight line would kink if bent that tightly I believe. ALSO: I snapped the plastic tube off the part that connects between the hose in question. I need this too! I'll check real quick online, but I could only find the larger bypass hose on parts sites. On the FSM photo, the plastic piece would be between the (right) end of the highlighted hose and the bypass tube. It is absent in the FSM snapshot. The broken plastic stem connects to the bypass tube. Any advice or links would greatly help! ~Please and thanks! -Sam