Jump to content
Ultimate Subaru Message Board

99 legacy #1 coil no fire?? 2,3,4 OK


Recommended Posts

Excellent site!! Hopefully, someone can help me on my a situation I have with a 99 Legacy coil. 2.2 motor. 89K. A/T New plugs. The car had a miss and stutter and a check engine light code that AutoZone scanned and coded as a bad "cat". Rev th motor gets you a flashing ch light. Was able to determine that coil has NO fire for #1 plug. 2,3,4 fire nicely. Did the usual swapping of coil, wires with no change. The more I played with the coil/wire swap the worse it got. Went from an occasional miss to total loss of #1 fire. The lady I am doing the work for isn't rich and fears that the dealer will just start throwing expensive parts at it. Any suggestions on where I should start in finding the demons? Appreciate any help.

Feel free to e-mail me in order to quicken solution. Vehicle is mail delivery and can't sit idle.

Thanks!! Dave

Link to comment
Share on other sites

As I understand things, each coil fires two cylinders. If a "coil" was bad, I would think you'd have a problem with two cylinders not firing.

This would make me suspect the plugs or wires. When you swapped wires, did the problem stay with cylinder 1 or change to another?

You may want to go out tonight when it's dark with a spray mister and see if there is any leakage from a cracked coil pack or bad wire.

Just a thought.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...