Gloyale Posted April 4, 2010 Author Share Posted April 4, 2010 All done. Installed int the car and it drives great. The one concern I have is the fluid filter. The Original H6 trans had a bypass cap bolted on instead of the spin on filter. The Forrester case that I used had the threaded pipe installed for a filter. In order to install the bypass cap from the H6, I would've needed to remove that threaded pipe for the filter, because that where the bypass bolt would go. So I left the filter there. Problem is, the H6 exhaust hits the filter. At least the heatsheild for the CAT. So I hammered a dent in the heatshield. It doesn't touch now, but the filter is DIRECTLY over the Cat. I am a bit worried about heat. I will have to remove the filter after a few days and inspect it for any signs of overheating. Otherwise the "hybrid" H6/Forrester trans is working fine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.