Jump to content
Ultimate Subaru Message Board

suspension questions


Recommended Posts

1: what is the proper way to remove the inner tie rod ends on an EA81 and EA82?

2:just making sure here: All NA manual axles have the same splines regardless of FWD/4wd correct?I know the turbo/auto axles are different.

3: Are the front brakes on an EA81 the same as EA82 front brakes?If not same will they atleast bolt up?

Edited by Uberoo
Link to comment
Share on other sites

The knuckles have a different roll radius. The calipers have a larger bolt pattern. And the discs are a little bit bigger. Also the rear bearing seal on the knuckle on EA82's are slightly larger, thus why EA82 axles won't work too well in EA81 knuckles.

It will all bolt up, but you will have horrible positive camber.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...