Jump to content
Ultimate Subaru Message Board
Rust

ea82 oil pump gasket/pressure spring.

Recommended Posts

Putting in new gasket should it be put in dry, or coat it w/ oil or permatex? Also has anyone put in a stiffer pressure spring in the pump to increase pressure?

Share this post


Link to post
Share on other sites

put some oil on the rubber seals to prevent them from slicing themselves during the install.

 

just to give you an idea of the integrity of the oil pump, i had serviced a running engine that had the check ball on the oil pump pried out and missing, no inner oil seal, and missing a bolt.

 

pretty simple to do. make sure you can turn the oil pump sprocket freely before torquing down the bolts.

 

you can test your oil pressure and prime the system by mounting a 12mm socket to a drill and spinning the shaft before installing the belts, to make sure everything is good before operating the engine.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×