Jump to content
Ultimate Subaru Message Board
Sign in to follow this  
The Scooby

finished cluster

Recommended Posts

well got home tonight and tossed everything back together with regards of the gauge cluster, well then come to find i lost the off button for the HAVAC and one screw, so looks as if im going to the bone yard for that.

 

oh well i have to pull it all back off again later on to change the headlight color from white to red, same with the HAVAC system controls and wiper controls all to red bulbs.

 

but here they are with the new bulbs, also found out why my rear defrost didnt work, helps if its pluged in.

 

118_1894_IMG.jpg

 

and with the ultra blue bulbs for turn signals.

 

118_1895_IMG.jpg

 

just a few more things like change the interior color from brown to grey, replace the bumper and fender, fix dents, paint, tint, lower, then onto the EJ22T and FT AWD 5sp tranny and im done.

Share this post


Link to post
Share on other sites

stock they are 194 size, so i just went to the local ricer import shop, Auto Zone that is, and picked up a set of red 194 bulbs for like $2.29 per pair.

 

but like i said, i still have to change everything else in the dash over so its all red, rather then red with white in the sides, that already anoys my eyes just sittin in the drive way.

Share this post


Link to post
Share on other sites

Ya Red is so much easier on the eyes.

I think you might have inspiered me... wait I have a freaken digi dash, (*&^%!!

Share this post


Link to post
Share on other sites

ya i was gonna go blue, BUT red is much better for night vision, same with green, but i like red better, much easier to get red bulbs compared to green.

Share this post


Link to post
Share on other sites

sorry to hijack a post, but you mentioned your changin the interior from brown to grey?

 

is your car PB 4wd 5-speed? if it is i need a brown shift knob with PB, shift boot, and center console piece around the boot. just thought i'd offer, just so ya keep me in mind when the time comes..

Share this post


Link to post
Share on other sites

meeky ment push button 4WD, not power brakes. and the red looks cool I didn't think it would look that good but it does. how hard was it?

Share this post


Link to post
Share on other sites

the hardest part was pushing all the wiring back into the dash to put it back together.

 

there are 6 194 red bulbs, then one mini one that i didnt change and made no effect.

 

4 bulbs are for the gauges, and 2 are for the turn signals, they are all labled on the circut board on the back.

 

no i got the selector 4wd by the way, no push button.

 

Shean

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×