Jump to content
Ultimate Subaru Message Board

87 GL fwd EA82 wagon brake question


Recommended Posts

There's a whole procedure for it.

 

First of all - make or buy a bleeder bottle. 20oz soda bottle and some clear tubing works - punch a hole in the cap and then insert the tubing down to the bottom of the bottle. Fill about 1/3 full of fluid.

 

Then you have to bleed in this order: MC primary (close to firewall), Right rear, Left Front, MC Secondary, Left rear, Right front.

 

You hookup the tubing to the bleeder screw, crack it open and pump the pedal till you see new fluid going through the tube. Then move to the next wheel, etc.

 

Throughout this process you need to insure that the MC is always full of new fluid. If you suck air into the MC you have to start all over again.

 

GD

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...