The Dude Abides Posted September 22, 2010 Share Posted September 22, 2010 Im going to lift the front end of my car 1 more inch to level it out and get some of the extreme angle off the front cv shafts. Im curious if anyone has done this with 1 piece of 1inch square tubeing and if so how long does it need to be. Also how far apart are the bolt holes from eachother so i can tell the machine shop what to do. Quote Link to comment Share on other sites More sharing options...
subiemech85 Posted September 27, 2010 Share Posted September 27, 2010 twist your nuts Quote Link to comment Share on other sites More sharing options...
mcbrat Posted September 28, 2010 Share Posted September 28, 2010 you'll need 1x2 rectangular tubing. you can see the bolts/nuts from the underside of the car, where the engine crossmember bolts to the frame rails. you'll need longer bolts, and you may need to lengthen the steering linkage... you can have my 1" blocks, and adjust one of the holes as needed... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.