Jump to content
Ultimate Subaru Message Board

dashboard buttons backlight


Recommended Posts

Taking care of the usual subbie things on my new 95' Leg,

 

Sorted the "steering pump leak" last weekend that turned out to be just a leaking resevoir at the seam...(round type). de-crimped it, crimped it back with plenty of RTV at the joint, all nice and dry now :)

 

Next on the list are: the usual oil pump seal thing and one CV joint, peasy, parts on the way.

 

Now then, the one thing that looks way more difficult to sort, (at least for me) is the missing back light in all the little dashboard buttons, i.e. A/C, heating, fog light, etc. Just bothersome at night when you need to press on them...

 

The instruments lights are fine BTW.

 

They were all functional some weeks ago, but not anymore.

 

I sure checked all the fuses in passenger and engine bays and all are OK. so not THAT simple...

 

Is there a relay that controls these to look for?

 

any other ideas?

 

Grazie mille!

 

TG

Link to comment
Share on other sites

All but one of those bulbs were burnt out on my 99 obw. I tried to get the complete bulb and base but had no luck. I got mini 12v bulbs at radio shack. Had to solder out the old bulb. The new bulbs have long wire leads that need to be bent into place , trimmed and soldered. Not hard ,just a pita.

Link to comment
Share on other sites

turns out that i might be wrong..... the headlapmp dipper regulator backlight does work....

 

not sure it means that it runs through the same module as the A/C, fog etc, but it might

 

a quick check revealed quite a few burned lamps in the push buttons, os better rule that out first.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...