turbosubarubrat Posted October 19, 2014 Author Share Posted October 19, 2014 Pulled and bought a 5 speed d/r yesterday from pick n' pull with a 1 year warranty. 1 Quote Link to comment Share on other sites More sharing options...
turbosubarubrat Posted October 29, 2014 Author Share Posted October 29, 2014 Exedy clutch came in the mail today and engine gasket kit shouldn't be to far behind. Took the heads to the machine shop last friday to get resurfaced and 3 leaking valves ground. Picked them up yesterday and it only cost $130 to get that done. Also bought a ej to ea adapter plate from Prwa101 over a week ago. I'm thinking i'm going to go with a carb since it makes it simpler, easier to work on, and less stuff to go wrong. Plus i would need to get a parts car to get everything i would need for fuel injection system or spend a hell of a money at pick n pull. If i don't like it carb'd i can always swap it to fuel injection. Quote Link to comment Share on other sites More sharing options...
turbosubarubrat Posted December 7, 2014 Author Share Posted December 7, 2014 ej to ea adapter plate. Steel one that came with the motor will be reworked and used on a wheeler. Gasket kit was only $60 shipped and has head bolts. Bought it for bolts, seals, and some gaskets. I need to get felpro or subaru head gaskets still. 150amp fuse block for the alternator. I still need to get a 110 amp alternator and 100 amp fuse. Exedy clutch kit. Subaru intake next vw weber intake. I'm probably going to use some bigger pipe since im going to have to fab up some flanges. 1 Quote Link to comment Share on other sites More sharing options...
turbosubarubrat Posted December 31, 2014 Author Share Posted December 31, 2014 Finally got around to making a custom clutch pilot tool for the 5 speed d/r and push button 4wd transmissions 1 Quote Link to comment Share on other sites More sharing options...
turbosubarubrat Posted January 13, 2015 Author Share Posted January 13, 2015 Have had a bunch of parts come in the mail for this the past couple weeks. Set of old new stock kyb strut inserts, rancho 5241 rear shocks, mr. gasket manual 1-6 psi fuel pressure regulator, rebuilt motorcraft escort distributor, and redline weber jet kit. Quote Link to comment Share on other sites More sharing options...
turbosubarubrat Posted January 20, 2015 Author Share Posted January 20, 2015 I'm using the 3.9 trans above in my hatch back so i bought this. It's a 85 gl10 turbo sedan. Has the 5 speed d/r 3.7 with open rear diff and disk brakes. Has working digi dash, ride height but front struts have been replaced with kyb's, cruise control, power everything, and rx interior minus front seats. ea82t is shot with almost no compression in all 4 cylinders. I think the heads cracked, rings leak, bad head gaskets, ect. The guy said it was ran at 10 psi of boost i think it was more like 20 psi since its only got 160k. Quote Link to comment Share on other sites More sharing options...
scubaroo84 Posted January 20, 2015 Share Posted January 20, 2015 What are you gonna do with the gl10? More specifically the turbo stuff? Quote Link to comment Share on other sites More sharing options...
turbosubarubrat Posted January 20, 2015 Author Share Posted January 20, 2015 What are you gonna do with the gl10? More specifically the turbo stuff? I'm going to part it completely. The things i'm keeping are the front end, rear disks, trans, drive line, rear diff, fly wheel and bolts, air shock stuff if i ever decide to do that, and maybe the muffler. Everything else i'm selling. Quote Link to comment Share on other sites More sharing options...
sumoco Posted January 21, 2015 Share Posted January 21, 2015 Any chance you would wanna sell me that scoop? Quote Link to comment Share on other sites More sharing options...
turbosubarubrat Posted January 21, 2015 Author Share Posted January 21, 2015 Any chance you would wanna sell me that scoop? I doubt you want it. It's made out of 2 paint roller pans. You can go buy 2 yourself cheaper than coming out to me and getting them. Quote Link to comment Share on other sites More sharing options...
sumoco Posted January 21, 2015 Share Posted January 21, 2015 That's hilarious Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.