1 Lucky Texan Posted December 5, 2012 Share Posted December 5, 2012 I know you already replaced the diff bushings, but, I've read that there are 'helper' pieces and maybe full aftermarket poly units that go in there. maybe Whiteline or prothane, etc. Also, I believe cardoc over on the outback forum used 3M windo-weld to create some bushings. just mentioning in case someone else reads the thread with diff bushing problems. Quote Link to comment Share on other sites More sharing options...
torxxx Posted December 5, 2012 Share Posted December 5, 2012 bad pinion bearing or bad side bearings on the diff carrier will also cause a nasty vibration. I had a customers legacy in the shop yesterday that had a bad vibration/whine around 45-60 mph, everything checked out ok, except the diff was low on oil and stinky. flushed/replaced the gear oil and it quieted down some and most of the vibration went away. Quote Link to comment Share on other sites More sharing options...
kanurys Posted February 6, 2015 Share Posted February 6, 2015 Too bad the pics and vid don't work anymore... my 1998 outback has similar bushing problems. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.