Jump to content
Ultimate Subaru Message Board

Smiley..........


monstaru
 Share

Recommended Posts

WElp replced the picture up front, and here are some more.

Just put the tires in front of her to see :)

IMG_5683.jpg

 

Finally got my wheels welded up

IMG_1103.jpg

 

Test fitting the bellhousing.I need to get anotherr Subaru hydro clutch.The one I have is from some other model i guess.Because it does nto match this bolt pattern.

IMG_1116_zpsc7f68dc6.jpg

 

Wheels all painted up, I thought I would like the whiite background.But don't.Ima change it to drab....

IMG_5691_zps12821f15.jpg

 

whipped up a twin stick setup...

IMG_5693_zps843a68db.jpg

 

Still working on the fluid barrier,

IMG_5699_zps0cf044e6.jpg

IMG_5700_zps3edf5817.jpg

 

I sat around the other night with sandpaper(300 grit-ish, and 1000 grit) and polished the inside leading edges of the twin sticks to get them to move more fluidly next to each other.Then hit them with a dremel and some rouge..

IMG_5703_zpsd9efa3b4.jpg

 

The whole layout, teting bolt sizes, looking azt length etc....

IMG_5704_zpsf44bfee5.jpg

 

Thats about it, I think I have made a deal on My Subie EJ d/r, so I will have the scrilla to throw at this thing again soon.

I need ARP studs for my knuckles, then I can put stuff together the way I want to!!

cheers

  • Like 1
Link to comment
Share on other sites

the clutch slave has to be from like a 2.5rs style. NA hydraulic, same with the clutch fork.

I looked just slightly earlier than you posted.It is literally from 2.5 5 speeds. from like 97 to whenever that generation ends.

Got athe proper Slave, and mounted it up the trans to make sure it fit.

Then checked the fitting to the Toyota master cylinder..

IMG_5712_zps31c5e559.jpg

 

IMG_5714_zps016118c1.jpg

 

Cheers:drunk:

Edited by monstaru
Link to comment
Share on other sites

I got the t case lined up,the4n realized the crosmember I got for my 85 frame, didna line up with an 82?ish frame....

IMG_5731_zps42d9129c.jpg

So , gotta remedy that....

And then remedy the front shock towers.The preliminary numbers state tthat the ford Towers are not going to work in this sitcheachin.

So , gotta deal with that...

Then we shall see what comes a knockin...

 

\cheeres

Edited by monstaru
Link to comment
Share on other sites

My buddy & I cut his cross member in pieces to build a custom mount for his Chevy motor & trans. We used the sides, but welded in a plate for a new bottom.

 

Im sure you could do it in an hour... cut each end off... bolt them to the frame. Tack replacement plate in place... remove and finish.

 

I have a buddy down the road with a CNC plasma table.He is going to be cutting me a mount like the Front Range Offroad DIY mount.I will be using that once I get it this week.

 

I should have the rest of my axle rebuild stuff by Friday,including my hub gears.

Then I will be putting that stuff together.

I am looking at trading the tires I have due to them being radials.....

But with my twin stick almost done,I have alot of irons in the fire right now.

Cheers

Link to comment
Share on other sites

I finally found your thread. Freaking bad*ss man!:headbang: I'm gonna have to come see it in person soon. And you gotta come see my s**t sometime soon too.:grin:

 

Jesse

Totally man!I'm kinda busy at work right now,but let's shoot for beers next week.

Cheers

Edited by monstaru
Link to comment
Share on other sites

So, I needed to add accoutrement for shock mounting in the front.

IMG_5751_zps962b9a44.jpg

Then needed to start the shockmounts

IMG_5753_zps28ea7615.jpg

Then I started the other side, and forgot to seat the pin on the follower:,,,,

IMG_5754_zps61105b90.jpg

 

Decided to move onto the axle again.

IMG_5755_zps5f1f3c68.jpg

Fingeredd on this being the last mods to the axle before being put together.

IMG_5757_zps4e9c266b.jpg

cheers

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...