Jump to content
Ultimate Subaru Message Board

Recommended Posts

I have two 92 ej22 engines that run really well. The question I have is, can the harness from a newer 22 or a 2.5 be swapped onto that motor so that I can drop the engine into a 97 outback? Just curious. It looks like it is doable, but I wanted to see if anyone has done it. I have several harnesses, so that is not an issue for me.

 

Thanks in advance.

 

Mike

Link to comment
Share on other sites

The important parts will all swap over with the intake manifold. Put the 97 manifold on the 92 engine, move the harness with it. The only other sensor I can think of that you might have to swap is the temp sensor.

You will need the dual port Y pipe though.

 

EGR shouldn't be that hard to trick. EGR has been a hot topic lately and there was a great idea in one thread to just run a hose from the EGR port on the manifold over to the intake box.

http://www.ultimatesubaru.org/forum/showpost.php?p=1152600&postcount=10

 

Otherwise, GD has detailed instructions on how to drill out the port in the head.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...