Jump to content
Ultimate Subaru Message Board

83 GL Clutch Replacement


Recommended Posts

It is easier to slide the engine forward. this can be done with 2 men and no crane. But if you went that far, you can just lift the motor out.

 

If you are trying to work from underneath, you have to separate the trans from the engine some 3 inches to clear the studs just to get in there, and by then you may have well removed it.

 

You would have wanted to remove the axles from the trnas stub, which you would have had to undo the ball joints to allow the room. The axles are pressed into the bearing, so by removing the nuts, all you can take off is the hub and rotor but the axles are still in the hub.

 

search the 'tube for 'art of subaru maintenance' to see some clever engine/trans wrangling

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...