bosslady Posted February 8, 2013 Share Posted February 8, 2013 Newbie here, thanks for reading. Driver's power window not raising or lowering properly. Motor seems to be working, so I figured the regulator was faulty. Removed the door panel and observed that one of the scissor arms --sturdy sheet metal--had sheared off near the center of the scissor mechanism. Obviously it needs to be replaced, but I wonder what could have caused this ? I have noticed that upon releasing the contol buttons on driver's and passenger sides that the motor seems to still be going---this is only when the windows are being closed. Looks like a few bolts need to come off to remove the old part...any tips or tricks to this procedure? Thank you , Legacy Wagon 241K miles Quote Link to comment Share on other sites More sharing options...
Fairtax4me Posted February 8, 2013 Share Posted February 8, 2013 I did one in my wagon a while ago and took a few pics. Ill have to see if I still have them. Not difficult to install but it's a pain in the rump roast to adjust everything properly after the new regulator is in. Quote Link to comment Share on other sites More sharing options...
bosslady Posted February 8, 2013 Author Share Posted February 8, 2013 Fairtax4me, thanks for the post. Photos and any hints on adjustments would be very helpful. I plan on installing the motor and regulator kit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.