LilLink1 Posted February 27, 2013 Share Posted February 27, 2013 Hey everyone new here and also pretty new with a carburetor. I had my carb rebuilt and now i need to adjust it. I found the screw in front and thought that was it i adjusted it to get idle right now its getting to much gas so assuming that was the air/fuel adjustment. So ppl saying to get to the others i need to remove the roll pin. My questing is where is the roll pin and what does it look like. If anybody has a pic or can have detailed instructions that would help a lot. Thanks Quote Link to comment Share on other sites More sharing options...
djellum Posted February 27, 2013 Share Posted February 27, 2013 need to know what carb and motor. the roll pin covers the air fuel mixture screw. if you have a stock Hitachi then its in the center bottom of the carb. the idle screw will be on the linkage on the passenger side of the carb. those are the only 2 adjustment screws (assuming you have a stock carb) Quote Link to comment Share on other sites More sharing options...
LilLink1 Posted March 1, 2013 Author Share Posted March 1, 2013 yes it is stock Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.