torxxx Posted March 3, 2013 Share Posted March 3, 2013 building my replacement trans for the lifted OB tommorow. What are the differences between the VLSD Center diff in the Phase 1, versus the Phase 2? Trying to decide which one I should use Quote Link to comment Share on other sites More sharing options...
Gloyale Posted March 3, 2013 Share Posted March 3, 2013 (edited) Totally different construction. You have to use the one that matches the transfer section. Not sure if you can mix phas I and phase 2 transfers and front sections Fwiw, the phase I are "serviceable" where as the phase ii are sealed units. Edited March 3, 2013 by Gloyale Quote Link to comment Share on other sites More sharing options...
torxxx Posted March 3, 2013 Author Share Posted March 3, 2013 I'm gonna have to do some fit testing today once I get to the shop then. I have my Phase 1 diff welded up and I prefer 4wd over all wheel drive (vlsd just pisses me off, why should be have to "wait" for the rear to spin. I do have my adapter plate, D/R tranny and driveline sitting ready to go in the car. just need to find a XT6 PP and clutch and get someone to help me finish milling my flywheel holes Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.