Murgen23 0 Report post Posted April 8, 2013 My idle is too high and the adjuster screw is not even touching the throttle. is this a problem with the electric choke set wrong? runs well now that ive put some time into it but the idle needs to come down from 1500 to 7-900. anything will help Share this post Link to post Share on other sites
rdweninger 177 Report post Posted April 8, 2013 I had a problem with my cable being too short (tight). If your cable is too short, it will not reach (with return spring) to your idle screw adjustment. Maybe this will help. Share this post Link to post Share on other sites
Svengouli7 12 Report post Posted April 9, 2013 check for vacuum leak and your throttle cable length. If this was a carter weber not hitatchi converted over to a 32/36 your length will be short on the cable Share this post Link to post Share on other sites
Murgen23 0 Report post Posted April 10, 2013 AHHHHHHH! it was the throtte cable. pissed me off, but now thats all well and good. thanks Share this post Link to post Share on other sites
