Murgen23 Posted April 8, 2013 Share Posted April 8, 2013 My idle is too high and the adjuster screw is not even touching the throttle. is this a problem with the electric choke set wrong? runs well now that ive put some time into it but the idle needs to come down from 1500 to 7-900. anything will help Quote Link to comment Share on other sites More sharing options...
rdweninger Posted April 8, 2013 Share Posted April 8, 2013 I had a problem with my cable being too short (tight). If your cable is too short, it will not reach (with return spring) to your idle screw adjustment. Maybe this will help. Quote Link to comment Share on other sites More sharing options...
Svengouli7 Posted April 9, 2013 Share Posted April 9, 2013 check for vacuum leak and your throttle cable length. If this was a carter weber not hitatchi converted over to a 32/36 your length will be short on the cable Quote Link to comment Share on other sites More sharing options...
Murgen23 Posted April 10, 2013 Author Share Posted April 10, 2013 AHHHHHHH! it was the throtte cable. pissed me off, but now thats all well and good. thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.