mightGETaSUBARU Posted May 22, 2013 Share Posted May 22, 2013 n07.537002-7903.73611ac110 Quote Link to comment Share on other sites More sharing options...
Turbone Posted May 22, 2013 Share Posted May 22, 2013 Its part of the A/C mount, the bottom I believe. Quote Link to comment Share on other sites More sharing options...
johnceggleston Posted May 23, 2013 Share Posted May 23, 2013 yes, the bottom AC bracket. the bolt hole on the top in the pic goes near the oil dip stick and bolts down into the block. the other 2 bolt holes, go horizontal toward the compressor and the larger AC bracket. Quote Link to comment Share on other sites More sharing options...
davebugs Posted May 23, 2013 Share Posted May 23, 2013 yes, the bottom AC bracket. the bolt hole on the top in the pic goes near the oil dip stick and bolts down into the block. the other 2 bolt holes, go horizontal toward the compressor and the larger AC bracket. After you look it'll make sense. IIR sometimes issues with the long bolts on that. Get them all started but loose - the horizontal bolts. Before tightening, and I install the top bolt before tightening the horizontal bolts - sometimes the horizontal bolts can cause the top bolt hole to not align ANd IIR it's easier to use an extension and put the (aor)ratchet in the cap betweent he engine and battery - but it's been a while.. Quote Link to comment Share on other sites More sharing options...
Fairtax4me Posted May 23, 2013 Share Posted May 23, 2013 (edited) http://www.buysubarupartsnow.com/oem-part/subaru/outback-parts/2000/limited/2-5l-h4-gas/hvac/condenser-compressor-and-lines/compressor-bracket/73611ac110 Edited May 23, 2013 by Fairtax4me Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.