Jump to content
Ultimate Subaru Message Board

GEN 2 front bumper build pics


Recommended Posts

so i decided to start a new bumper project because i wanted to have a removable winch. For the most part the build went rather smoothly in comparison to my last few build. but here is all the pictures i took from start to finish. let me know what you think

 

057_zpsb67052fa.jpg

058_zps26968daa.jpg

074_zps10f4276d.jpg

after cutting out the middle to add the receiver the subaru gods decided to let the bumper bow on me but its not to bad so i left it.

073_zps16e688f4.jpg

078_zps4b92b472.jpg

079_zps6deb79f6.jpg

076_zpsccd1d2e4.jpg

070_zpsc5adf8b1.jpg

and here is my winch from harbor freight. should do alright

060_zps879c1688.jpg

064_zps7aad93e4.jpg

and now the painting 5 coats of primer and 8 coats of paint.

084_zps1fd69a12.jpg

085_zps6582bd15.jpg

and finished product on my car.

090_zps2af79d21.jpg

088_zpsf5c28132.jpg

089_zps506f9d35.jpg

 

 

 

 

 

 

 

 

 

 

 

 

 

Edited by sube101
  • Like 1
Link to comment
Share on other sites

its actually a combination of 2" DOM and 1 1/2 schedule 40 pipe. a while back my company bent some two inch but it didnt turn out with good enough quality to sell so i have it all for personal use. all the straight pieces are the pipe all the mandrel bends are the 2" DOM.

  i still havent had the chance to test my winch out but i hope to do so fairly soon.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...