upnorthguy Posted October 15, 2013 Share Posted October 15, 2013 I'm wondering if anyone with a Legacy in the '95-'99 range that has a sunroof (power moon roof) could post a pic of the emergency tool used to manually open/close the sunroof. The '95 I recently purchased does not have the tool and I'm trying to figure out what I am looking for or what I can use as a substitute (is a hex head?). Thanks! Quote Link to comment Share on other sites More sharing options...
gbhrps Posted October 15, 2013 Share Posted October 15, 2013 upnorthguy, Its been years and 3 OBW's since I had a Subie that old, and I can't recall what the tool looked like, but pull down the center rear ceiling plug. There are several plastic plugs in the ceiling. You want the one back behind where the sunroof would park when it is fully open. It is dead center of the headliner side to side. Shine a light up into the opening, and you'll be able to see what you need. Good Luck! Quote Link to comment Share on other sites More sharing options...
86BRATMAN Posted October 16, 2013 Share Posted October 16, 2013 If you have any local junkyards that have gen1 Legacy's, go looking in their center console. They all, at least on the United States, have automatic seat belts, and use the same hex type tool as 95-99 sunroofs. Quote Link to comment Share on other sites More sharing options...
heartless Posted October 16, 2013 Share Posted October 16, 2013 any allen wrench of the right size will work - that is basically all the "tool" is. 1 Quote Link to comment Share on other sites More sharing options...
upnorthguy Posted October 16, 2013 Author Share Posted October 16, 2013 Thanks for the info everyone. This is on my (ever growing) list of salvage yard items I'll be looking for. If I don't find one I can always get a t-handle allen wrench and that should work. Quote Link to comment Share on other sites More sharing options...
MilesFox Posted October 16, 2013 Share Posted October 16, 2013 It is a big allen key. I can't remember the size, but if i were guessing, i would say 8 or 10 mm. probably 8mm Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.