Jump to content
Ultimate Subaru Message Board

98 Outback: squealing tights belts or pulley tensioner?


Recommended Posts

Squeals loud on "cold" starts not after.  "Cold" is not really cold here in Hawaii, just first thing in am (never below 70deg.)  Belts seem good and tight (and in good condition); tried the soap trick.  Maybe it's a pulley tensioner? Doesn't squeal after warmed up.  

Any ideas? 

 

Mahalo in advance!

Link to comment
Share on other sites

Hey 808--maybe it's just an island thing!  I had the same problem here in Honolulu awhile back. 

 

Finally took the AC belt tensioner out to check the idler pulley--thought the bearing had failed.  Turned out that the mounting nut was a bit loose and for a short time at start-up the pulley would go kapakahi--it was "off-axis," not perpendicular to the belt.  Reinstalled the mechanism, adjusted the tension, tightened the mounting nut and it's been quiet ever since.

 

Good luck.  Aloha.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...