1-3-2-4 Posted February 14, 2014 Share Posted February 14, 2014 Anyone know what size the 12 point bolts are? Quote Link to comment Share on other sites More sharing options...
ocei77 Posted February 14, 2014 Share Posted February 14, 2014 The head bolts are 14 and the others are 12. O. Quote Link to comment Share on other sites More sharing options...
1-3-2-4 Posted February 14, 2014 Author Share Posted February 14, 2014 (edited) Thanks, I assume that bolt on the back side of the motor needs a 12mm box wrench? Edited February 14, 2014 by 1-3-2-4 Quote Link to comment Share on other sites More sharing options...
Gloyale Posted February 14, 2014 Share Posted February 14, 2014 Thanks, I assume that bolt on the back side of the motor needs a 12mm box wrench? Yup and there are a couple 10mm under the oil pan and windage tray. One at on the side of the large coolant tube/chamber right behind the waterpump. Quote Link to comment Share on other sites More sharing options...
1-3-2-4 Posted February 14, 2014 Author Share Posted February 14, 2014 Yep I got all those off I just need to take off the 12 mm block bolts and the one on the back part of the motor. Quote Link to comment Share on other sites More sharing options...
1-3-2-4 Posted February 14, 2014 Author Share Posted February 14, 2014 Wait a sec... I guess the socket needs to be 12 mm 3/4"? My 1/2 is too fat. Quote Link to comment Share on other sites More sharing options...
ocei77 Posted February 14, 2014 Share Posted February 14, 2014 yep. you need 12 pt 12mm. O. Quote Link to comment Share on other sites More sharing options...
1-3-2-4 Posted February 14, 2014 Author Share Posted February 14, 2014 Yes I know but my 1/2" socket won't fit where the water jackets are. Im not sure if they make it in 3/8" Quote Link to comment Share on other sites More sharing options...
ocei77 Posted February 14, 2014 Share Posted February 14, 2014 use a 3/8 socket and ext with the adapter to 1/2 unless you have a 3/8 size breaker bar. O. Quote Link to comment Share on other sites More sharing options...
1-3-2-4 Posted February 16, 2014 Author Share Posted February 16, 2014 (edited) I ended up returning everything and just ordering this which will be here Monday http://www.amazon.com/gp/product/B00271N7OG/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1 You can see on my picture attachment the hump part of the socket is why it wont fit to reach the bolts because it's too fat to fit Edited February 16, 2014 by 1-3-2-4 Quote Link to comment Share on other sites More sharing options...
ocei77 Posted February 16, 2014 Share Posted February 16, 2014 I know the issue. I just use a 3/8 socket with a breaker bar or an adapter to the 3/8 from 1/2. Whichever was handier at the moment. Generally the 1/2 adapter so I can use my impact wrench to wind the bolts out. O. Quote Link to comment Share on other sites More sharing options...
1-3-2-4 Posted February 16, 2014 Author Share Posted February 16, 2014 I'm just going to wait until my socket comes tomorrow. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.