Uberoo Posted August 6, 2014 Share Posted August 6, 2014 So now it can't fit on narrow trails .Bummer. I was looking forward to seeing it absorb boulders and logs at creepy crawly speeds.So when does the high speed testing start? Quote Link to comment Share on other sites More sharing options...
Gloyale Posted August 9, 2014 Share Posted August 9, 2014 1200 bucks so far shocks included Ohh.......c'mon now........you KNOW you would charge more money to fab that for someone else......Time is money. Calculate shop rate hours for the time involved and the project gets a bit more pricey. otherwise......If you will build me a car like that for $1200 bucks......sign me up! 1 Quote Link to comment Share on other sites More sharing options...
TSSFAB Posted August 12, 2014 Share Posted August 12, 2014 1 Quote Link to comment Share on other sites More sharing options...
monstaru Posted August 13, 2014 Share Posted August 13, 2014 (edited) Even if that left eye isna designed for an air inlet , it should be left blank. Daddy likeee..lolExcept I would have cut the fenders out and made stock-ish size arms.LOL I will predict that this build will be fun as hell to jump. When are you tuning shocks? cheers Edited August 13, 2014 by monstaru 1 Quote Link to comment Share on other sites More sharing options...
TSSFAB Posted August 13, 2014 Share Posted August 13, 2014 not im going to get it sprung and new motor and build fenders for it and just drive it and then try testing it they are the stiffest valving they offer off the self they should feel ok for now. trails Yawn nothing aginst it but booty fab can trail I hope to rip arms off and re develop this car over the years till i can say this is a viable kit to do over 100 mph in the desert. Trails is coming on the next build looking at a forester xt on 37s bolt in solid axle kit that will look as good as it dose strong and run toy trans and t case. time and spoob id want 15000+ for full meal deal say 3 inch round shocks 1000 hp custom 33 spline cvs, run laser cut all new ford baja knuckels and aftermarket brakes 14 inch rotor. it would be perfect if some one wanted me to build there car. I would require a bare shell or a stripped rally prep car that was not a pile of spoob but then i could tie the whole car in too the cage and build a real proper awd bajabaru. Quote Link to comment Share on other sites More sharing options...
Gloyale Posted August 13, 2014 Share Posted August 13, 2014 time and spoob id want 15000+ for full meal deal say So......only like a 1200% markup over the first estimate.......lol Quote Link to comment Share on other sites More sharing options...
monstaru Posted August 14, 2014 Share Posted August 14, 2014 by the time you got done building, you would want more than 15g's lol Quote Link to comment Share on other sites More sharing options...
ryot1 Posted October 23, 2014 Share Posted October 23, 2014 dear mother of god!!!!!!!! need any workers ...i want to get my hands on this!! Quote Link to comment Share on other sites More sharing options...
Phizinza Posted November 23, 2014 Share Posted November 23, 2014 What's the turning circle like with those style upper joints? Quote Link to comment Share on other sites More sharing options...
TSSFAB Posted May 15, 2015 Share Posted May 15, 2015 Some one might like an update fresh motor is in just needs plumbing and all the suspension had its final assembly and torquing down. Im happy with everything in the back of the car it looks like it will be a viable rear end for actually abusing. The front not so much but I have some good ideas that should fix the front after I get some miles on it and see how it feels. The shock i thought would feel soft but at a 2 to one ration and the stiffest stock valving from bilstein the car really feels planted like it might corner too the thought of that makes me feel evil. 1 Quote Link to comment Share on other sites More sharing options...
monstaru Posted May 20, 2015 Share Posted May 20, 2015 I wanna ride! Quote Link to comment Share on other sites More sharing options...
apintonut Posted June 25, 2015 Share Posted June 25, 2015 What shock are u using now? What are the extended axles? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.