plawrence77 Posted June 25, 2014 Share Posted June 25, 2014 so I'm just trying to see if this is possible. what i'm thinking about doing to taking a 86 brat and pull the motor and trany. i've found a donor car that i would take the trany, drive line, rear diff, and cv axles out of so i would have stronger parts to hold up better. i figured i would have to get a drive line made to fit the right length. i want to put a ej20 or ej22 motor into it to give it some go. the donor car is a mid 90's legacy. i just want to try and find out what i need to do before i get to deep into this build and get stuck. anything will help out. Quote Link to comment Share on other sites More sharing options...
skishop69 Posted June 26, 2014 Share Posted June 26, 2014 From what I remember on reading for a swap of this nature... The ECU, engine harness cut down and excess removed, build a cross member for the tranny. hybrid axles as neither the Brat or the Lego axles will work, custom shift linkage and driveline. I believe the rear diff may be a bolt in, but don't remember for sure. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.