Jump to content
Ultimate Subaru Message Board

Keith's 1987 Lifted DL Wagon


keithmoilanen
 Share

Recommended Posts

Here is how she stands. First pick my car next to my buddies who has a 2in lift. Took it out to the beach for the fourth!

 

What I have done so far:

 

Cb radio

Stereo/new speakers

4in lift (SOS)

29 tires KM 2

Custom Skid plate (SOS)

KC lights in the grill

truck bed liner interior / outside lower trim

 

 

To do:

 

Next up is to find a d/r transmission and then do a 2.2 swap.

Finish removing carpet. 

Truck bed liner for interior trim

Winch

Bumpers

Roof Rack

possible paint job/ (stay blue or go black!)

post-31359-0-21815800-1407383740_thumb.jpg

post-31359-0-22434800-1407383770_thumb.jpg

post-31359-0-30317400-1407384938_thumb.jpg

Edited by keithmoilanen
  • Like 2
Link to comment
Share on other sites

Nice build man! You build the 4in lift kit your self?

 

As far a 2.2 swap you'll love the power with those 29's! Adaptor plates you can get from inferno fabrication, and I offer 22 swap harness services.

My buddy builds the kits, SOS fab. As far as the harness, last I check people were asking to  trim the harness for 250$. I am not going to spend that much on a trim. 

Link to comment
Share on other sites

i have those same tires on my lifted wag, make sure the camber on your front tires is correct those tires wear quickly

 my front 2 are ruined.

yeah next summer i will have to figure out how to correct the camber. I have only put a couple hundred miles on the car since I bought it two years ago. In two weeks it goes back to sitting under a tree until I get back from school. 

Link to comment
Share on other sites

Finished doing the lower trim with truck bed lining. Looks good. Will take better pics tomorrow. Getting her all dialed in before the big camping trip this weekend! Also built a fishing pole holder on my hatch on the inside so when you open the door its hanging up ready to hit the waters!

post-31359-0-49690600-1407990940_thumb.jpg

post-31359-0-73736700-1407990957_thumb.jpg

  • Like 2
Link to comment
Share on other sites

i got 86 accord springs. the part no through oriellys was sp02025

 

they are in stock here in AK so they must be in stock where you are.

 

i also put the monroe  4 runner struts from a 98 4runner 2.7 4wd p# 71352

 

lifts the back 2" so no need for the lift in the back and it is the best mod i have ever done.

 

super easy hardest part was getting the spring compressors back of.

Link to comment
Share on other sites

i got 86 accord springs. the part no through oriellys was sp02025

 

they are in stock here in AK so they must be in stock where you are.

 

i also put the monroe  4 runner struts from a 98 4runner 2.7 4wd p# 71352

 

lifts the back 2" so no need for the lift in the back and it is the best mod i have ever done.

 

super easy hardest part was getting the spring compressors back of.

.

 

Could i use those 4 runner shocks on the rear of my loyale with stock height king springs that im all ready running? If so whats the down side to using them

  • Like 1
Link to comment
Share on other sites

.

 

Could i use those 4 runner shocks on the rear of my loyale with stock height king springs that im all ready running? If so whats the down side to using them

you can, but you will only have about an inch and a half up travel, i bought the struts first and ran stock springs on them. not a good idea, there was alot of down travel but it bottomed out on everything. you would be better using accord springs on stock struts,

Link to comment
Share on other sites

Nice Wagon!

 

 

... What wheels are those?

 
Are those the Temporary Use, 15" rims for Spare tires?
 
 

i got 86 accord springs. the part no through oriellys was sp02025
 
they are in stock here in AK so they must be in stock where you are.
 
i also put the monroe  4 runner struts from a 98 4runner 2.7 4wd p# 71352
 
lifts the back 2" so no need for the lift in the back and it is the best mod i have ever done.
 
super easy hardest part was getting the spring compressors back of.

 

The Complete information & photos on that Mod, could be found, here:

~► 
http://www.ultimatesubaru.org/forum/topic/106807-improved-shock-absorbers-and-spring-coils-on-loyales/

Kind Regards.

Edited by Loyale 2.7 Turbo
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...