dudesmccool Posted January 16, 2015 Share Posted January 16, 2015 I need the Nissan t/o bearing for my ea/ej swap, but is it from the 2l or the 2.4l. Size? I have searched the forums, but no one specifys which one Quote Link to comment Share on other sites More sharing options...
skishop69 Posted January 16, 2015 Share Posted January 16, 2015 (edited) I could be wrong, but if you're swapping an EJ in, you use all the EA clutch components, You re-drill the flywheel and use an adapter from SJR to mount the engine and tranny. I have everything to do mine, but I just haven't had time to do it. Edited January 16, 2015 by skishop69 Quote Link to comment Share on other sites More sharing options...
ystrdyisgone Posted January 16, 2015 Share Posted January 16, 2015 Correct, just use a standard ea throwout bearing. Quote Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted January 18, 2015 Share Posted January 18, 2015 use all stock EA82 parts , you just need a redrilled flywheel and a adapter , I sell them here www.sjrlift.com Scott 1 Quote Link to comment Share on other sites More sharing options...
Crazyeights Posted January 18, 2015 Share Posted January 18, 2015 Scott's combo ^^^ is still working great for me. It's been several years now. Thanks SJR! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.