subarusaver Posted February 22, 2015 Share Posted February 22, 2015 I am Looking for advice on Where to purchase a Weber carb for my ea82 to replace my Hitachi carb.My car is an 85 GL-10 with a 60,000 mile EA 82 from an 89 dl with my old intake and disty. ALSO..... Will I need a fuel pressure regulator? Is there a fuel return line hookup? If not, what to do with the current return line? Are there better adapter plates with different vendors? Is it worth it to look for a used weber and rebuild it? Quote Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted February 22, 2015 Share Posted February 22, 2015 I am Looking for advice on Where to purchase a Weber carb for my ea82 to replace my Hitachi carb... Do you want it New or Used? New = I obtained mine at Carbs Unlimited. Look for the K-731M kit. Used = Post a Thread at the Subaru Stuff Wanted section of the Forums. ...EA 82 from an 89 dl with my old intake and disty... If your EA82 from a '89 DL is SPFi and you want to use your old Distributor / intake on it, You shall try to make the engine to work with the stuff you already have, Prior to start a Weber carb Swap, that will assure you that the Distributor retrofitting worked. ... Will I need a fuel pressure regulator? ... No, if you use the Stock Fuel Pump for the Carbureted engine. ... Is there a fuel return line hookup? If not, what to do with the current return line? Are there better adapter plates with different vendors? ... You better review carefully This Writeup: ~► http://www.ultimatesubaru.org/forum/topic/71510-ideas-on-swaping-a-weber-carb-on-ea82%C2%B4s/ Kind Regards. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.