Jump to content
Ultimate Subaru Message Board

Exhaust manifold cast piece? Need help


Recommended Posts

If you don't have any of the exhaust recirculation stuff or if you want to delete them have the exhaust flanges made to just bolt to the heads. The turbo headers just bolt to the heads and the y-pipes do on the non catalyst cars.

So taking those off and taking and blocking off the egr would suffice? Or could I just remove these

Link to comment
Share on other sites

Wy not just leave them in? On mine, i removed the threaded pipe from the spacer, then cut them to just 2" long, heated the end, hammered the end flat, and welded them shut, and reinstalled into the spacer. Now the spacer is just acting as an adapter between the pipe and the head.

Link to comment
Share on other sites

Wy not just leave them in? On mine, i removed the threaded pipe from the spacer, then cut them to just 2" long, heated the end, hammered the end flat, and welded them shut, and reinstalled into the spacer. Now the spacer is just acting as an adapter between the pipe and the head.

Because my spacer is ruined, po welded the exhaust right to it. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...