ARJ Posted April 23, 2015 Share Posted April 23, 2015 Does anyone know if a 1987 brat (brumby) ignition lock assembly will fit a 1991 brat (brumby) or where and if a 1991 lock assembly can be purchased thanks ARJ Quote Link to comment Share on other sites More sharing options...
jono Posted April 23, 2015 Share Posted April 23, 2015 (edited) 100% will, but according to the mob I bought my new lock from claimed some Brumbies may not be same. I got mine from ebay. Bought last two they had on the listing. Came with matched door locks as well Interestingly - the aftermarket part number was NID 1600 . Came with new wire contacts at back as well and not the wire loom as indicated below in Leeroys link to Nice Products depiction Edited April 23, 2015 by jono Quote Link to comment Share on other sites More sharing options...
Leeroy Posted April 23, 2015 Share Posted April 23, 2015 Search for Nice Products: https://niceproducts.com.au https://niceproducts.com.au/product/nic1600-lock-switch/ Quote Link to comment Share on other sites More sharing options...
Leeroy Posted April 23, 2015 Share Posted April 23, 2015 This one if you want door looks too: https://niceproducts.com.au/product/nid1600-ignition-barrel-doors/ Quote Link to comment Share on other sites More sharing options...
jono Posted April 23, 2015 Share Posted April 23, 2015 Good find Leeroy ! I did not try the search on the part number. I did however pay more than I needed to then on ebay. I'll go back and edit out the supplier I got mine from Quote Link to comment Share on other sites More sharing options...
Leeroy Posted April 24, 2015 Share Posted April 24, 2015 This one for Gen 1 Subarus: https://niceproducts.com.au/product/nid1601-ignition-barrel-doors/ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.