ARJ 1 Posted April 23, 2015 Does anyone know if a 1987 brat (brumby) ignition lock assembly will fit a 1991 brat (brumby) or where and if a 1991 lock assembly can be purchased thanks ARJ Share this post Link to post Share on other sites
jono 291 Posted April 23, 2015 (edited) 100% will, but according to the mob I bought my new lock from claimed some Brumbies may not be same. I got mine from ebay. Bought last two they had on the listing. Came with matched door locks as well Interestingly - the aftermarket part number was NID 1600 . Came with new wire contacts at back as well and not the wire loom as indicated below in Leeroys link to Nice Products depiction Edited April 23, 2015 by jono Share this post Link to post Share on other sites
Leeroy 106 Posted April 23, 2015 Search for Nice Products: https://niceproducts.com.au https://niceproducts.com.au/product/nic1600-lock-switch/ Share this post Link to post Share on other sites
Leeroy 106 Posted April 23, 2015 This one if you want door looks too: https://niceproducts.com.au/product/nid1600-ignition-barrel-doors/ Share this post Link to post Share on other sites
jono 291 Posted April 23, 2015 Good find Leeroy ! I did not try the search on the part number. I did however pay more than I needed to then on ebay. I'll go back and edit out the supplier I got mine from Share this post Link to post Share on other sites
Leeroy 106 Posted April 24, 2015 This one for Gen 1 Subarus: https://niceproducts.com.au/product/nid1601-ignition-barrel-doors/ Share this post Link to post Share on other sites
