Jump to content
Ultimate Subaru Message Board

Recommended Posts

Need help fast. I sold a 96 legacy with 2.2. It would not start once in a while. I'd let it sit 10 or 15 minutes it would restart fine. Once started it ran great and never shut down. It got worse over time. I changed the ECM started fine. Thought I fixed it but I was wrong. ANY IDEAS ? Crank sensor Or coils? It doesn't have spark when it won't start. tried starter fluid. Car being pickup in 2 days.

Link to comment
Share on other sites

Crank or cam sensor, either one will give a no-spark condition, but both will set codes. Even if the CEL isn't on check it for codes.

 

The igniter module on the firewall can give intermittent spark. Used is the best option here. New ones are expensive, and aftermarket parts don't usually last long.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...