Jump to content
Ultimate Subaru Message Board

Rough idle, & check engine light.


 Share

Recommended Posts

  • 1 month later...
  • 1 month later...
On 8/7/2018 at 3:49 PM, czny said:

Found this while reading today:

 

I found the tps in this post for about $260 at autozone. So just to be sure I'll be doing this right, I need to de-solder the stock connector on the harness. Then clip the square connection off the sensor, and solder the wires from the connector to the stock harness?

Link to comment
Share on other sites

Well that was a success. I cut the connector off the new TPS, and the connector off the stock harness then soldered everything together. The car drove better on my test run than it has the entire time I've had it. The only difference between the 2 was the new TPS has a white wire instead of a green wire like the stock harness has. If anyone is looking for a new TPS, it's part # TPS4085.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...