Shreddin_Shane Posted March 9, 2016 Share Posted March 9, 2016 Hey there, was tearing down a ea82 engine out of a 93 loyal that i jus picked up, The car would start and idle fine, didn't have much engine noise at all but would bog way down whenever you touched the gas/ put any load on the engine. Head gaskets were blown and one of the cylinders has really bad pitting/scoring but I also found this small dowel looking thing in the oil pan. Wondering where this may have come from? Thanks Quote Link to comment Share on other sites More sharing options...
DaveT Posted March 9, 2016 Share Posted March 9, 2016 Looks like one of the pins they put to align halves of the block, or heads, or engine to bell housing. Kind of odd to find one in the pan I guess . .. 1 Quote Link to comment Share on other sites More sharing options...
Shreddin_Shane Posted March 9, 2016 Author Share Posted March 9, 2016 These are my thoughts as well. Wondering how it ended up there Quote Link to comment Share on other sites More sharing options...
MR_Loyale Posted March 10, 2016 Share Posted March 10, 2016 Looks like an alignment pin between Trans and engine. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.