Thatrobbguy Posted November 13, 2016 Share Posted November 13, 2016 hey guys ive been looking at a ton of forums for bits and pieces of the info i need but cant quite make it 100% i have myself the 2003 baja non turbo and its an automatic sadly. ive been sitting on a 5 speed that i cant seem to get sold so i was considering swapping it into my baja. now i have the brake cluster (clutch,brake,booster) the flywheel a clutch and pressure plate the tranny itself the driveshaft. basically everything. now my issue lies on the wiring,rear end, and ecu. so my questions is would i need to splice wires in do i need the ecu and i think my rear is 4.44 but im not 100% would a 4.11 rear from another subie bolt right in? any other pointers would be great. im quite confident in my ability to do the swap i just dont want to get it apart and realize i need something completely random. photos just of the things ive got. Quote Link to comment Share on other sites More sharing options...
matt167 Posted November 13, 2016 Share Posted November 13, 2016 I would use a JDM 4.44 turbo trans. They are really cheap and match your auto rear diff. You just need the manual parts from a Baja legacy or outback from 2000-2004. The 1999 imp would have a 3.90 ratio unless it was from a 2.5rs. Its not worth the effort in itself just because you have that trans. Use one worth it Quote Link to comment Share on other sites More sharing options...
matt167 Posted November 13, 2016 Share Posted November 13, 2016 I would use a JDM 4.44 turbo trans. They are really cheap and match your auto rear diff. You just need the manual parts from a Baja legacy or outback from 2000-2004. The 1999 imp would have a 3.90 ratio unless it was from a 2.5rs. Its not worth the effort in itself just because you have that trans. Use one worth it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.