Jump to content
Ultimate Subaru Message Board

Stock radio questions


Recommended Posts

Got a stock radio from a jy car and I was wondering if anyone knew what the round connection on the back is, I'll put up a picture when I'm home.

I also ordered new antenna wire but I don't know how I should solder it to the board. I already de-soldered the wire that was on there but I can't remember if it was the inner wire or the braided wire that was that was actually connected. I want to say that the braided wire is what was making the connection but from my understanding it's the inner wire that makes the connection and the braided wire acts as insulation to keep interference from coming through the speakers.

As always any help is appreciated.

Link to comment
Share on other sites

Ohm meter from ground to each pin will find you gnd.

 

To find the L R inputs, set the radio to aux or whatever it has. Use a music player / phone headset output for a signal. To be safe, put something like a 2000 ohm resistor and a 1uf capacitor in series with the signal from the player to the pin you are testing.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...